HW-DC-DIP-10W-24S12
10 W isolated DC-DC converter module with 24 V input, 12 V single output and 1.5 kV isolation in a DIP package.
The HW-DC-DIP-10W-24S12 is a Hawun isolated DC-DC converter module that takes a nominal 24 volt input and produces a regulated 12 volt output at 10 watts, with 1.5 kilovolt isolation in an industry-standard DIP package. It provides board-level isolated power for industrial, telecom and instrument designs, where a 24 volt rail is common and an isolated 12 volt rail is needed for sensors, interfaces and analog circuits. The higher power compared with the 3 watt module covers loads that draw more current, such as a small analog section or a group of interface circuits, while keeping the same standard pinout so a design can scale within the family. As with any converter, the input filter and the layout decide the noise and the thermal behaviour, and the input range must cover the rail's variation with margin. Every device is factory-traceable and ships with an import declaration, a certificate of origin and RoHS documentation. BeiLuo holds this part in regional stock and our FAE team supports converter selection, input filtering and layout.
FAE Professional Review
This is the mid-range isolated converter we recommend for a 24 volt system that needs an isolated 12 volt rail. It keeps the standard pinout of the family, so scaling from the 3 watt module is straightforward, and the isolation protects the load from the input rail's noise. Plan the thermal path, because 10 watts in a small module dissipates a meaningful amount of heat, and keep the input loop tight.
| Parameter | Value |
|---|---|
| Input | 24 V nominal |
| Output | 12 V |
| Power | 10 W |
| Isolation | 1.5 kV DC |
| Package | DIP module |
Application Circuits
Industrial control power
Reference circuits and application schematics for Industrial control power are available from our FAE team.
Telecom and datacom equipment
Reference circuits and application schematics for Telecom and datacom equipment are available from our FAE team.
Isolated interface and sensor rails
Reference circuits and application schematics for Isolated interface and sensor rails are available from our FAE team.
Instrument and measurement
Reference circuits and application schematics for Instrument and measurement are available from our FAE team.
Board-level isolated power
Reference circuits and application schematics for Board-level isolated power are available from our FAE team.
Need a reference schematic or design review? Our FAE engineers can share verified circuits and layout guidance for this part.
Related Documents
Alternative Part Numbers
| Model | Package | Note | Action |
|---|---|---|---|
| HW-DC-DIP-3W-12S05 | DIP module | Lower-power 3 W converter for a 12 V rail | View |
Complementary Part Numbers
| Model | Package | Note | Action |
|---|---|---|---|
| HW-MED-15W-24 | Enclosed | Medical-grade supply for the input rail | View |
Recommended Complementary Products
Frequently Asked Questions
Can I scale within the converter family?
Yes. The family uses a standard pinout, so a design can move from the 3 watt module to the 10 watt module with little change, which simplifies scaling a product line.
Confirm the thermal design for the higher power.
How much heat does it dissipate?
A 10 watt converter dissipates a meaningful amount of heat in a small module, so provide a thermal path to the board and allow airflow where possible.
Validate the design at the worst-case load and ambient.